FAQ
Frequently Asked Questions
Basic references are provided by the Arduino foundation: https://www.arduino.cc/ Programming references: https://www.arduino.cc/en/Reference/HomePage Getting...
Wed, 28 Jun, 2017 at 7:00 PM
If you find that your Z axis endstop is triggering with the nozzle too high from the bed for a good first layer squish, there are several methods of setting...
Tue, 19 Sep, 2017 at 7:53 PM
ABS and PLA are the two most common types of filament used in 3D printing. They are both Thermoplastics, which means they become malleable when heated and...
Mon, 20 Nov, 2017 at 11:25 AM
To convert your DIYElectronics Prusa i3 from 3mm to 1.75mm you will need the following two products: Our standard 1.75mm extruder body and accessories k...
Mon, 12 Mar, 2018 at 12:01 PM
Connect your printer to your PC Download and unzip XLoader (http://russemotto.com/xloader/XLoader.zip) Download and extract the firmware CR10S-300.rar fi...
Wed, 30 May, 2018 at 6:25 PM
If you are looking to upgrade your 3D printer to make use of an external MOSFET for your heated bed or hotend you may take a look at this guide to help you ...
Tue, 5 Jun, 2018 at 3:32 PM
For info on our HC-05/06 , JDY-08 and AT-09 modules, please see our helpful wiki guide here: http://www.diyelectronics.co.za/wiki/#Arduino/JDY08/ Hope t...
Wed, 19 Sep, 2018 at 2:47 PM
The machine I would recommend for any beginner would be the Ender 3: https://www.diyelectronics.co.za/store/printers/2006-creality-ender-3-3d-printer.html ...
Fri, 19 Oct, 2018 at 3:37 PM
The software and installation guide provided by Creality can be found with this link - https://www.creality3d.cn/download/product-file_c0002 If you req...
Wed, 7 Nov, 2018 at 1:39 PM
The FlashForge Adventurer 3 is truly a fantastic 3D Printer, but because it was designed for environments like classrooms, it is built with a small, enclose...
Fri, 5 Apr, 2019 at 12:26 PM