- Connect your printer to your PC
- Download and unzip XLoader (http://russemotto.com/xloader/XLoader.zip)
- Download and extract the firmware CR10S-300.rar file attached
- Open up Xloader.exe and upload the CR-10S-300.hex file extracted in the previous step
- Under Device - Ensure you have Mega(ATMEGA2560) Selected
- Select the correct COM port your printer has been assigned to
- Leave the Baud Rate at 115200
- Finally, click the 'Upload' Button
Flashing Stock CR10S Firmware Print
Created by: Charl
Modified on: Wed, 30 May, 2018 at 6:25 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.