The Heated Bed Struggles to Reach 100'C or More
Print
Created by: Robert Mawbey
Modified on: Wed, 26 Apr, 2017 at 12:56 PM
That's quite normal, we suggest printing ABS at 80-90'C bed temp, we find that is ideal with our aluminium build plate and ABS / Acetone solution.
Additionally it is possible to get to 110'C if you insulate the bottom of the bed. Using an enclosure helps too.
We find this is a bit hot for printing directly to the aluminium bed with ABS, rather this bed temp is suitable for print surfaces such as PEI.
Robert is the author of this solution article.
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.
